Elektro-Automatik PSI_10200_70_3U DC power supply 0...200V_0...70A_5000W

PSI-10000 3U Series features:

Wide range input, 208 V - 480 V +-10 % 3ph AC
Active Power-Factor-Correction, typical 0.99
Very high efficiency up to 96 %
High performance of up to 15 kW per unit
Voltage from 0 - 60 V up to 0 - 2000 V
Currents from 0 - 20 A up to 0 - 510 A
Flexible power regulated DC output stages (autoranging)
Regulation mode CV, CC, CP, CR with fast crossover
Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
Color 5“ TFT display with touch control and intuitive user interface
Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series
Master-Slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
Integrated function generator with predefined curves
Predefined automotive test procedures for LV123, LV124 and LV148
Command languages and drivers: SCPI and ModBus, LabVIEW, IVI
Built-in interfaces: USB, Ethernet, Analog, USB Host, Master-Slave-Bus, Share-Bus

Detailné informácie

Ďalšie produkty v kategórii

Cena bez DPH	€ 6 800.00
Cena s DPH	€ 8 160.00
ks
Dostupnosť produktov	Na dotaz
Kód	EA_PSI_10200_70_3U

Súvisiace produkty
Príslušenstvo

Záruka 24 mesiacov

Produktová stránka výrobcu

Detailný popis
K stiahnutiu

Detailný popis Elektro-Automatik PSI_10200_70_3U DC power supply 0...200V_0...70A_5000W

The DC laboratory power supplies in the PSI 10000 series from EA Elektro-Automatik convert the energy from the grid into a regulated DC voltage with an efficiency of over 96%.

The PSI 10000 series includes single and three phase units, which, together with the wide input range, allows use with practically all global mains voltages. The DC voltage and current are directed by the application and the spectrum ranges from 0 - 60 V to 0 - 2000 V and from 0 - 6 A up to 0 - 1000 A in a single device. The DC supply operates as a flexible output stage with a constant power characteristic (autoranging), and a wide voltage, current and power range. To achieve higher power and current all units are equipped with a master-slave bus. This enables up to 64 parallel connected devices to be combined into one system which can provide up to 1920 W and 64000 A. Such a system works as a single unit and can use different power classes, only the voltage class must remain constant. In this way a user can construct a 75 kW system from two 30 kW and one 15 kW devices from the PSI 10000 range.

Furthermore, typical laboratory functionality is provided. This includes an extensive function generator, alarm and warning management, assorted interfaces and ports, software solutions and many more functions.

Hore

Zobraziťk stiahnutiu »