AIM-TTI_TGR6000 6GHz RF Signal Generator

10 MHz to 6000 MHz frequency range

10 Hz setability, +/-1 ppm frequency stability
Locking to external frequency standard
-110 dBm to +7 dBm amplitude, 0.1 dB steps
Fast stepping sweep with dwell times down to 10 ms
List sweep of up to 1000 points of amplitude vs frequency
User compensation tables for specific test set-ups
Storage for 12 generator set-ups and 16 sweep lists
Compact half-rack 2U casing uses minimum bench space
Full remote control through RS232, USB, LAN and GPIB
Significantly lower cost than other 6GHz generators

Cena bez DPH	€ 4 693.00
Cena s DPH	€ 5 631.60
ks
Dostupnosť produktov	Na dotaz
Kód	AIM-TTI_TGR6000

Príslušenstvo

Záruka 36 mesiacov

Produktová stránka výrobcu

Detailný popis
K stiahnutiu

Detailný popis AIM-TTI_TGR6000 6GHz RF Signal Generator

The TGR6000 is a low-cost RF signal generator with a maximum frequency of 6GHz. It is intended for CW (carrier wave) applications where modulation is not required, and avoids the costs associated with adding modulations. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used for higher precision.

The TGR6000 incorporates an advanced stepped sweep system which allows both frequency and amplitude to be swept. The sweep can be defined in terms of start and stop frequency/amplitude points with linear or logarithmic interpolation between them. The total number of points can be set from 2 to 1000 and the dwell time between points can be set from 10 ms up to 10 s.

The TGR6000 is both simple and intuitive to use. Frequency and level can be entered directly from the keyboard in whichever units are preferred. Alternatively values can be changed in user defined increments using the spin wheel or up/down keys.

The generator has internal storage for up to 12 complete instrument set-ups and up to 16 sweep lists. Set-ups and sweep lists can be given user defined names if required. The TGR6000 incorporates full remote control using USB, RS-232, GPIB and LAN (Ethernet) interfaces.

Hore

Zobraziťk stiahnutiu »